Did the fishermen become completely dependent on mechanics? And Svolvær was early on self-sufficient in terms of workshops. The workshops produced liners and ensured proper compression for engines used along the coast for many months.
The cylinder was so worn that it could barely be repaired, and if repair wasn’t possible, they would simply make a new one.
Now, the fishermen needed help with both boats and engines. The traditional fishing vessels of Nordland were consumed by flames in the Midsummer bonfires, and the language of two-stroke engines filled the harbors and fishing grounds.
“Hurry up, hurry up,” or “Hang on, hang on.” That was the biggest problem with the engines, one of the old fishermen explained: they could never stop making those repetitive noises. [module-489]
It was in the old workshops that problems were solved. Initially, this occurred during the installation of the heavy engines, and later when maintenance was required. Workshops began to emerge, and a new professional group developed.
Traveling mechanics, who today are called iron and metal workers, would bring their toolboxes and carry out repairs onboard. For external work such as sealing casings, repairing propellers or rudders, they would allow the boats to lie at anchor.
If the mechanic couldn’t finish the work before high tide, he had to complete it standing waist-deep in water. Ole Marhaug from Svolvær started that way. The engines were oversized, but they were also reliable.
Sometimes, fishermen would use the engines for ten or fifteen years before encountering problems. One of the reasons for this was that many of the mechanics and technicians eventually developed their own variations of well-known engine models.
They saw where the fault lay and what was causing the engines not to function during fishing, and they were able to fix it. Many of these men eventually became very skilled and acquired knowledge that would otherwise only be available at the university level.
The coastal boat builders learned the techniques. They started as mechanics’ assistants and gradually moved to workshops and forges that, over the years, became modern factories with a large workforce.
They could machine crankshafts, cylinder blocks, cooling fins, and rudders. They created new cylinder heads, improved combustion and air intake, and extracted more power from the engines. They were even able to machine cylinder liners. The experienced mechanics in Svolvær built entire engines themselves, from the foundation bolts to the regulator. When it was difficult to obtain parts, they cast them themselves.
The fact that even the top covers could be cast in Svolvær was of great importance. While the large iron foundries were located in Bodø and Harstad, this important work could also be carried out in Lofoten. They also cast pistons, cylinders, and engine blocks when needed.
Any workshop that respected itself would have three-dimensional models of all the components in the engines.
The workshops did a good job, but they sometimes struggled to keep up with the demand. One fisherman from Finnmark sent a telegram to his workshop: “Send twenty replacement propeller shafts, Oh God, Oh God.”
The workshops in Svolvær learned how to rivet iron boats. The old local boats had to be drydocked for sealing and reinforcement. They could also replace plates; one of the workshops even had its own punching machine, a machine that made holes in the iron plates. At Tvedt Mek., they also repaired the boilers on steamships.
It was Dan and Hein, Populær, Brunvold, and Bolinder. All four-stroke engines. Engines that ignited each time the piston was at its highest point, essentially inhaling and exhaling.
Union, Dintel, Skandia. Today, they are all gone. In those days, they were the ultimate in fishing reels.
Storage batteries arrived. Inventions emerged that no one had dreamed of, making fishermen even more reliant on workshops. In the years following World War I, engines began to appear on the market. Many came from the United States. Brands like Wikman and Union were common. These engines were started with compressed air and were often difficult to start manually. A 10-horsepower Bolinder engine weighed 200 kilograms.
And Svolvær followed suit. Fishing boats from all along the coast came to the workshops in the town. In Svolvær, one could get things done.
In the 1950s, another major change occurred: the diesel engine arrived. This engine was almost like it could think for itself. The speedboats became lighter, with better power, electric starters, and were so advanced that no workshop today can really do much with them. They run until they break down, and then they are replaced. Injection systems and nozzles have become a science. And the workshops in Svolvær continue to keep up with these developments.
The great years, from 1972 to 1982.
The shipbuilding industry in Svolvær experienced a boom between 1972 and 1982. This was partly because large vessels were built at Svolvær Mek. Never before had so many people in Svolvær been employed in the shipbuilding industry as during this period. At its peak, Svolvær Mek. had over one hundred employees. The level of work performed was advanced; large trawlers and military boats were built, and the shipbuilding industry received a great deal of attention and praise.
In addition to the significant activity at Svolvær Mek., the well-regarded workshops of Skarvik AS and O. Marhaug Mechanical Workshop AS also performed well.
Until 1978, many large boats were built at Svolvær Mek., and there was great optimism in the town. In 1978, the company went bankrupt, and it happened suddenly, with far-reaching consequences that extended beyond Svolvær.
A new activity was established at the company through the creation of Svolvær Shipyard, and many of the workers were able to continue as if nothing had happened. However, in 1982, there was another bankruptcy, and this time it was final. A total of one hundred jobs were lost, and many who lost their jobs had to leave Svolvær. After some time, the facility was sold, and today Lofoten Sveiseindustri owns and operates the plant.
Source: Frank A. Jenssen and Tor Henriksen.


